Power Supply for FujiFilm Fuji X100V; Fuji X100F; FinePix HS30EXR – AC Adapter AC-9V + CP-W126 9V 2A 18W ca 3m + DC Coupler (Dummy Battery) from CELLONIC
Not available
Expected on 27.11.2026
5% discount if ordered in advance
Shipping: 4.95 €
Secure payment
Your payment is sent over an SSL-encrypted connection and handled by our payment providers. We do not store your card details.
Your data is protected
We use your data to process your order and do not sell it to third parties. You can find the details in our privacy policy.
What our customers say
-
Andreas Germany
There are many offers. If you look at all of them, you realise that only here do the photos (sharp and large enough) and description match. In addition, a clear list of suitable cameras and legible data labels on the photos convinced me. All this has to be right before you connect a €1,500 camera. For the Fujifilm X-T3 camera, I had to file a recess in the wall of the dummy (approx. 5mm deep) so that the round cable would fit into the camera's channel. It is visible when you lift out the rubber grommet (which was made for a flat cable). It is tethered, and it has to be bent into the dummy gap so that the cover can be closed easily. I fixed the cable to the dummy on the inside in 2 places (in the gap) with adhesive as strain relief. If the cable moves, it can break over time at the soldering points on the inside. The effort is minimal, and the cheap power supply unit is then possibly better adapted than the original one.
-
Steffen Germany
I ordered two adapters for the permanent supply of two X-S10s because they are used in a broadcasting studio. The cables are long enough to reach the sockets even with a tripod. Plug in the adapter, plug it in, and you're done. Works great!
Fits your
We have not listed this product as compatible with the
That does not necessarily mean it will not fit — our compatibility list is not exhaustive.
Does this product fit your device?
Fits 29 devices
Fits the following devices
No device matches your filter.
Replaces these original part numbers
- Fuji AC-9V
- Fuji CP-W126
- FujiFilm AC-9V
- FujiFilm CP-W126
Description
Power supply for your device – run it from the mains with CELLONIC
Power the listed models directly from a household socket with this CELLONIC power supply AC-9V + CP-W126 – as a replacement for a lost or faulty original adapter, or as a second supply for use at a desk or in a studio. For cameras using a DC coupler, check the exact camera, coupler and power-supply combination.
Compatible models (selection): FujiFilm Fuji X100V; Fuji X100F; FinePix HS30EXR
What makes the CELLONIC power supply the right choice for your device?
• Made for your device – Output 9V / 2A (18W) with the connector the listed models use
• Mains operation – Runs from a standard socket (100-240V) for a suitable device in the studio, at a desk or in a fixed location; the device’s own operating limits still apply
• Cable length – ca 3m cable
• Product type – AC Adapter
Product specifications:
Brand: CELLONIC
Model: AC-9V + CP-W126
Type: AC Adapter
Output: 9V 2A 18W
Input: 100-240V
Cable length: ca 3m
In the box: Power supply + DC Coupler (Dummy Battery)
Before you buy: compare the device model, the connector and the required voltage with the compatibility list.
Compatibility
Compatible models: FujiFilm Fuji X100V, Fuji X100F, Fuji FinePix HS30EXR, Fuji FinePix HS50EXR, Fuji FinePix HS33EXR, Fuji FujiFilm X-A5, Fuji FujiFilm X-E3, Fuji FujiFilm X-H1, Fuji FujiFilm X-T100, Fuji FujiFilm X-T30, Fuji X-A1, Fuji X-A10, Fuji X-A2, Fuji X-A3, Fuji X-E1, Fuji X-E2, Fuji X-E2S, Fuji X-M1, Fuji X-Pro1, Fuji X-Pro2, Fuji X-T1, Fuji X-T10, Fuji X-T2, Fuji X-T20, FujiFilm Fuji X-A7, FujiFilm Fuji X-Pro3, FujiFilm Fuji X-S10, FujiFilm Fuji X-T200, FujiFilm X-E4 – see the Compatibility tab for the full list
Check the mains plug and input voltage at the place of use, and the device’s voltage, current requirements, polarity and exact connector dimensions. Matching the plug shape or a device name alone does not establish electrical compatibility.
Technical details
| Article number: | 927570 |
|---|---|
| Weight: | 235 g |
| Length: | 180 mm |
| Width: | 80 mm |
| Height: | 50 mm |
| EAN: | 4063714156605 |
Compatibility
Fits the following devices
- Fuji Film X-A5
- Fuji Film X-E3
- Fuji Film X-H1
- Fuji Film X-T100
- Fuji Film X-T30
- Fuji FinePix HS30EXR
- Fuji FinePix HS33EXR
- Fuji FinePix HS50EXR
- Fuji X-A1
- Fuji X-A10
- Fuji X-A2
- Fuji X-A3
- Fuji X-E1
- Fuji X-E2
- Fuji X-E2S
- Fuji X-M1
- Fuji X-Pro1
- Fuji X-Pro2
- Fuji X-T1
- Fuji X-T10
- Fuji X-T2
- Fuji X-T20
- Fuji X100F
- FujiFilm Fuji X-A7
- FujiFilm Fuji X-Pro3
- FujiFilm Fuji X-S10
- FujiFilm Fuji X-T200
- FujiFilm Fuji X100V
- FujiFilm X-E4
Replaces the following products
Reviews
-
Andreas Germany
There are many offers. If you look at all of them, you realise that only here do the photos (sharp and large enough) and description match. In addition, a clear list of suitable cameras and legible data labels on the photos convinced me. All this has to be right before you connect a €1,500 camera. For the Fujifilm X-T3 camera, I had to file a recess in the wall of the dummy (approx. 5mm deep) so that the round cable would fit into the camera's channel. It is visible when you lift out the rubber grommet (which was made for a flat cable). It is tethered, and it has to be bent into the dummy gap so that the cover can be closed easily. I fixed the cable to the dummy on the inside in 2 places (in the gap) with adhesive as strain relief. If the cable moves, it can break over time at the soldering points on the inside. The effort is minimal, and the cheap power supply unit is then possibly better adapted than the original one.
This review was translated automatically. Source language wasEs gibt viele Angebote. Wenn man sich alle anschaut, stellt man fest, dass nur hier die Fotos (scharf und groß genug) und Beschreibung zusammenpassen. Dazu eine saubere Auflistung geeigneten Kameras, lesbaren Datenetiketten auf den Fotos haben mich überzeugt. Das alles muß stimmen, bevor man eine 1.500€ teure Kamera anschliesst. Für die Kamera Fujifilm X-T3 musste ich eine Aussparung in der Wand des Dummies feilen (ca 5mm tief), damit das runde Kabel die Rinne der Kamera reinpasst. Sie ist sichtbar, wenn man die Gummidurchführung (die für ein Flachkabel gefertigt wurde) heraushebt. Sie ist angebunden, und sie muss in die Dummy-Lücke eingebogen werden, damit der Deckel sich leicht schließen lässt. Das Kabel am Dummy habe ich noch innen, an 2 Stellen (in der Lücke) mit Kleber als Zugentlastung fixiert. Bewegt sich das Kabel, kann es mit der Zeit an den Lötstellen im Inneren brechen. Der Aufwand ist minimal, und das günstige Netzteil ist dann möglicherweise besser angepasst als das originale. -
Steffen Germany
I ordered two adapters for the permanent supply of two X-S10s because they are used in a broadcasting studio. The cables are long enough to reach the sockets even with a tripod. Plug in the adapter, plug it in, and you're done. Works great!
This review was translated automatically. Source language wasHabe zwei Adapter für die Dauerversorgung von zwei X-S10 bestellt, da diese in einem Broadcasting Studio genutzt werden. Die Kabel sind ausreichend lang um selbst mit Stativ an die Steckdosen zu kommen. Adapter rein, strom drauf, fertig.
Funktioniert Top! -
Verified buyer Germany
Everything fine ???? neatly packaged, fair price. Is recognized by the camera (xt200) as a power supply when in use (plug symbol in the LCD display).
This review was translated automatically. Source language wasAlles bestens ???? ordentlich verpackt fairer Preis. Wird von Kamera (xt200)als Netzteil erkannt bei Verwendung (Stecker-Symbol im LCD-Display). -
Philippe France
Good, allows you to work in the studio without power supply constraints
This review was translated automatically. Source language wasBien, permet de travailler en studio sans contrainte d'alimentation -
Pierre France
Works perfectly
This review was translated automatically. Source language wasFonctionne parfaitementVerified purchase
-
Jose Luis Spain
Very professional.
This review was translated automatically. Source language wasMuy profesional. -
Liping Sweden
Verified purchase
-
This review was translated automatically. Source language was
Verified purchase
Product safety
Manufacturer / EU Responsible person
| Manufacturer | subtel GmbH |
|---|---|
| Address | Mainzer Str. 3, Berlin, 10247, Germany |
| info@subtel.es | |
| Safety data sheet | download |